Coatings & Resin
Systems
Spray, brush, and trowel-applied protective coatings for tanks, floors, bunds, and secondary containment — from vinyl ester flake linings to high-build epoxy systems.
The coating is only as good as the application
Coatings and resin systems protect where sheet linings aren't practical — large field-erected tanks, concrete bunds, floors, trenches, and secondary containment.
We apply vinyl ester, epoxy, polyurethane, and ceramic coatings by spray, brush, and trowel. Each selected for the chemical, temperature, and substrate.
Our teams work on-site with NACE-certified inspectors supervising every stage — from surface prep through final DFT verification.
Surface preparation is 80% of coating performance. We never compromise on prep — and we inspect every square metre.
Zero-Shortcut Application
The right system for every substrate
Four coating families covering steel, concrete, and composite substrates.
Vinyl Ester Systems
Glass flake-reinforced vinyl ester for chemical tank interiors and concrete bunds.
Epoxy Systems
Novolac for chemical resistance, high-build for immersion, primers for multi-coat systems.
Polyurethane Systems
PU topcoats for UV resistance. Flexible PU for expansion joints and vibrating equipment.
Ceramic & Speciality
Ceramic-filled for erosion in slurry systems. High-temperature for exhaust and flue gas.
From surface prep to certified coating
NACE-supervised application with full documentation.
Coating system by application
Recommended coating systems for common applications.
| Application | Vinyl Ester | Epoxy | Polyurethane | Ceramic |
|---|---|---|---|---|
| Chemical Tank Interior | ||||
| Concrete Bund | ||||
| Steel Externals | ||||
| Floors & Trenches | ||||
| Slurry Piping | ||||
| High Temp >200°C |
Tank Farm Coating —
Chemical Complex
Vinyl ester flake lining for 8 storage tanks and complete bund coating at a chlor-alkali facility. On-site application with NACE Level III supervision.